82
1. Rotate the three latches to
release the fi lter housing co-
ver; then loosen the inlet boot
clamp.
2. Remove the fi lter housing cover
and air fi lter element.
3. Fill a wash pan larger than the
element with a non-fl ammable
cleaning solvent; then dip the
element in the solvent and
wash
it.
4. Squeeze the element by pres-
sing it between the palms
of both hands to remove ex-
cess solvent. Do not twist or
wring the element or it will
develop
cracks.
5. Dry the element.
6. Put the element in a plastic bag;
then pour in air fi lter oil and
work the oil into the element.
7. Squeeze the element to remove
excess
oil.
8. Clean any dirt or debris from inside the air cleaner. Be sure no
dirt enters the carburetor.
9. Install the air fi lter and cover.
10.Connect the inlet boot and tighten the clamp securely.
AIR FILTER HOUSING
DRAIN TUBE
Inspect the “duck bill” drain in front
of the main housing for debris and
for proper sealing.
A torn air fi lter can cause damage to the ATV engine. Dirt and dust
may get inside the engine if the element is torn. Carefully examine
the element for tears before and after cleaning it. Replace the ele-
ment with a new one if it is torn.
! CAUTION
Summary of Contents for 2008 400 2x4
Page 9: ...8 Warning Labels A C F E H ...
Page 57: ...56 NOTES ...
