78
PROTECTIVE RUBBER BOOTS
The protective boots should be inspected periodically according to the
Maintenance Schedule.
Ball Joint Boots (Upper and Lower/Right and Left)
1. Secure the ATV on a sup-
port stand to elevate the front
wheels.
2. Remove both front wheels.
3. Inspect the four ball joint boots
for cracks, tears, or perforations.
4. Check the ball joint for free-play
by grasping the steering knuckle
and turning it from side to side and up and down.
5. If boot damage is present or ball joint free-play seems excessive,
contact an authorized Arctic Cat ATV dealer for service.
Tie Rod Boots
(Inner and Outer/Right and Left)
1. Secure the ATV on a support
stand to elevate the front
wheels.
2. Remove both front wheels.
3. Inspect the four tie rod boots for
cracks, tears, or perforations.
4. Check the tie rod end free-play
by grasping the tie rod near
the end and attempting to move it up and down.
5. If boot damage is present or tie rod end free-play seems
excessive, contact an authorized Arctic Cat ATV dealer for
service.
BATTERY
The battery is located under the seat.
The battery in this ATV is a “sealed” type and does not require any
maintenance unless discharged. Distilled water and/or electrolyte
cannot be added to the battery.
Summary of Contents for 2008 400 2x4
Page 9: ...8 Warning Labels A C F E H ...
Page 57: ...56 NOTES ...
