67
GENERAL INFORMA
TION
Oil Level Stick
There is an oil level stick for checking the engine oil level. to check the
oil level, use the following procedure.
1. Unscrew the oil level stick and wipe it with a clean cloth.
2. Install the oil level stick and thread it into the engine case.
3. Remove the oil level stick; the engine oil level should be above
the „L“ mark but not higher than the „F“ mark.
SEAT LATCH
1. To remove the seat, lift up on
the latch release (located at the
rear of the seat); then raise the
rear of the seat and slide it rear-
ward.
2. To lock the seat into position,
slide the front of the seat into
the seat retainer and push down
fi rmly on rear of seat. The seat should automatically lock into position.
n
Note:
The ATV sould be on level ground when checking the engine oil
level.
Do not overfi ll the engine with oil. Always make sure the oil level is
above the “L” mark but nor higher than the “F” mark.
! CAUTION
Make sure the seat is secure before mounting the ATV. Severe per-
sonal injury may result if the seat is not properly secured.
! WARNING
Summary of Contents for 2008 400 2x4
Page 9: ...8 Warning Labels A C F E H ...
Page 57: ...56 NOTES ...
