Arcteq AQ-S214 Instruction Manual Download Page 7

Page: 7 / 122

Changes

- Terminology consistency improved (e.g. binary inputs are now always called digital inputs).

- Tech data modified to be more informative about what type of measurement inputs are used (phase currents/

voltages, residual currents/voltages), what component of that measurement is available (RMS, TRMS, peak-to-

peak) and possible calculated measurement values (powers, impedances, angles etc.).

- Improvements to many drawings and formula images.

- Improved and updated IED user interface display images.

- AQ-S214 Functions included list Added: Indicator objects.

- Added inches to Dimensions and installation chapter.

- Added raising frames, wall mounting bracket, combiflex frame to order code.

- Added logical input and logical output function descriptions.

- Additions to Abbreviations chapter.

- Added button test description to Local panel structure chapter.

- Added parameter descriptions to General menu IED user interface chapter.

- Added new parameter descriptions to Monitoring menu IED user interface chapter.

- Added note to Configuring user levels and passwords chapter that user level with a password automatically locks

itself after 30 minutes of inactivity.

- Added more "Tripped stage" indications and fault types to Measurement value recorder function.

- Updated: Digital input activation and release threshold setting ranges and added drop-off delay setting.

Revision

2.04

Date

8.6.2021

Changes

- increased the consistency in terminology

- various image upgrades

- visual update to the order codes

1.2 Version 1 revision notes

Table. 1.2 - 2. Version 1 revision notes

Revision

1.00

Date

30.1.2013

Changes -

The first revision for AQ-S214

Revision

1.01

Date

22.11.2013

Changes -

Additions to HMI structure and digital input module chapters

Revision

1.02

Date

2.2.2015

Changes

Added RTD&mA input module, Double LC 100Mb Ethernet card module and Serial RS232 & serial fiber

module hardware descriptions

Added object control and monitoring function description and technical data

Revision

1.03

Date

11.3.2015

Changes -

Alarms-description revised

Revision

1.04

Q-S214

-S214

Instruction manual

Version: 2.04

Summary of Contents for AQ-S214


























































































































Search results

Summary of Contents for AQ-S214

Reviews:

Related manuals for AQ-S214

Brands by name

Popular brands

Arcteq AQ-S214, Instruction Manual

Search results

Summary of Contents for AQ-S214

Reviews:

Related manuals for AQ-S214

Brands by name

Popular brands