Burn Navigator® User’s Manual
Page 22
Home
The Home screen shows:
1)
The current primary fluid
2)
The current infusion rate
3)
When the next update is due
4)
By hour post burn 10, the
Projected 24 hour volume.
The Next Update Due will show a
number of minutes until the update is
due, or it will show “NOW” if the update
is due.
Updating Pump Rate
When you change the pump rate in between hourly updates, update the Burn Navigator on
the Home screen by pressing the “Current infusion rate” field. The software will calculate
the total volume for the next hourly update based on how long the pump was at each rate.
Note:
The Burn Navigator does not communicate with any pumps.
Patient
The Patient screen shows the
Information you entered in the New
Patient Setup. You may change the
data in the white fields, except for the
Protocol.
The Burn Navigator start time
(“BurnNav started”) is time stamped
when you complete the New Patient
Setup. The BurnNav started time
cannot be changed. The elapsed time
since burn is calculated based on the
original calculated time of burn.
For inactive patients, the “Burn Nav ended” time records the time that decision support was
ended.
