12
2012 series Pneudraulic Installation Tool (HK969)
Disassembly
(continued)
1
2
3
4
5
8
7
6
Figure 3
1. Remove the vacuum tube
from the cylinder. (
2012V
only)
2. Secure the head/handle in a
vise. Rotate the pintail bottle
until the retaining-ring holes
are visible. R
each through the
bottle window with
TRUARC
pliers (P/N
502857
) and
remove the retaining ring,
and then remove the washer.
3. Remove the pintail bottle.
4. Remove the bottle adapter
(and vacuum ON/OFF slide,
2012V
only).
5. Remove the end cap
assembly and spring.
6. Remove the washer and
O-ring from the
spring
side
of the end cap.
7. Remove the retaining ring
on the bottle side of the
end cap. Remove the spacer,
wiper seal, washer, and
O-ring.
8. Remove the O-rings from
the vacuum ON/OFF slide.
(
2012V
only)
Special Disassembly Instructions for 2012B
&
2012V
