INSTALLATION INSTRUCTIONS
Apartment Fan Coil: FSA
664 01 5001 00
7
MOTOR SPEED SELECTION
Before operating Fan Coil, be sure that proper blower
speed has been selected. High speed tap is
recommended for most applications. For those
applications requiring lower air flows, low speed tap can
be used.
Color Code For Motor Lead Wires
MOTOR SPEED TAP
WIRE COLOR
C -- Common
Yellow
1 -- High
Black
2 -- Low
Red
NOTE:
Fan speeds are selected manually. To change the
fan speed, switch the black and red fan motor leads on
printed circuit board terminal SPT (COM).
START--UP PROCEDURE
Refer to outdoor unit Installation Instructions for system
start--up instructions and refrigerant charging method
details.
CARE AND MAINTENANCE
The system should be regularly inspected by a qualified
service technician. Consult the servicing dealer for
recommended frequency.
Between visits, the only consumer service recommended
or required is air filter maintenance and condensate drain
operation.
Air Filter
Inspect air filters at least monthly and replace or clean as
required. Disposable type filters should be replaced.
Reusable type filters may be cleaned by soaking in mild
detergent and rinsing with cold water. Install filters with
the arrows on the side pointing in the direction of air flow.
Condensate Drain
During the cooling season check at least monthly for free
flow of drainage and clean if necessary.
!
CAUTION
PRODUCT DAMAGE HAZARD
Failure to follow this caution may result in poor
unit performance and/or product damage.
Never operate Fan Coil without a filter. Damage to
blower motor or coil may result. Factory autho-
rized filter kits must be used when locating the fil-
ter inside the unit.
International Comfort Products, LLC
Lewisburg, TN 37091
