ArchWork ARCPLOT81TRI, User Manual

Page: 26 / 44

ARCPLOT81TRI
6
- 2 - INSTALLATION
2.1 MOUNTING
ARCPLOT81TRI may be set up on a solid and even surface (fig.2). The unit can also be mounted with to a
support brackets (1), the unit can be on different surfaces such as walls and ceilings. The mounting place
must be of sufficient stability and be able to support a weight of 10 times of the unit’s weight.
• Fixed the mounting brackets to a suitable location on a solid surface, taking care to position the remov-
able upward as shown.
• Fixed the projector through the mounting clip
• Adjust the angle of projector
• Secure the mounting clip by inserting the bolt in the removable part.
• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
Fig.2
1
±45°
WALL
REMOVABLE
PART