©
American DJ Supply
®
- www.americandj.com - Spiral Scan™ Instruction Manual Page 2
American DJ
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
User Instructions
General Instructions:
Thank you for purchasing the American
DJ
®
Spiral Scan.
™
To optimize the performance of this product, please
read these operating instructions carefully to familiarize yourself with
the basic operations of this unit. Be sure you understand these instruc-
tions completely before attempting to operate this unit. The unit is not
sound activated and does not include any built-in programs. To operate
this unit you must use some type of universal DMX controller such as
the American DJ
®
DMX Operator™ of American DJ
®
Show Designer.™
You may also consider the Auto-Mate™ by American DJ
®
, this is a mini
DMX controller that comes with eight built in programs specifically for
the Spiral Scan™ (please note that all programs in the Auto-Mate™ are
preset and may not be changed).
Customer Support:
American DJ
®
provides a toll free customer
support line, to provide set up and installation help and to answer any
question should you encounter problems during your set up or initial
operation. You may also visit us on the web at www.americandj.com
for any comments or suggestions. Toll free customer service hours are
Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any type of repair yourself without the manufactures consent,
doing so will void your warranty. In the unlikely event your unit may
require service please contact American DJ
®
customer support.
Spiral Scan™
Introduction
This fixture is fitted with a discharge lamp which is highly susceptible
to damage if improperly handled. Never touch the lamp with your bare
fingers as the oil from your hands will shorten the lamp life. Never
install, mount, or place this fixture in areas prone to heavy vibration.
Also, never move the fixture until the lamp has had ample time to cool.
Remember, lamps are not covered under warranty conditions. Never
remove the lamp socket assembly when the fixture is on.
Spiral Scan™
Discharge Lamp Warning
