DMX IN
DMX OUT
POWER
FUSE
GMA 5AMP
ON
1 2 3 4
ON
1 2 3 4 5 6 7 8 9
OPTIONS
START ADDRESS
DMX IN
DMX OUT
POWER
FUSE
GMA 5AMP
ON
1 2 3 4
ON
1 2 3 4 5 6 7 8 9
OPTIONS
START ADDRESS
DMX IN
DMX OUT
POWER
FUSE
GMA 5AMP
ON
1 2 3 4
ON
1 2 3 4 5 6 7 8 9
OPTIONS
START ADDRESS
©
American DJ Supply
®
- www.americandj.com - Spiral Scan™ Instruction Manual Page 7
©
American DJ Supply
®
- www.americandj.com - Spiral Scan™ Instruction Manual Page 8
1. Option switches - These switches will activate one of four options:
Switch 1: Focus - When activated this switch will center the
mirror with a white spot. This will allow you to focus
the beam properly.
Switch 2: Self Test - When activate this function will activate a
built in self test program.
Switch 3: Inverted Pan - When activated this switch will invert
the PAN value. Left will become right and vice versa.
Switch 4: Inverted Tilt - When activated this switch will invert the
TILT value. Up will become down and vice versa.
2. Dip Switches - These switches are used to set the DMX address.
Each switch corresponds to a specific value based on binary code.
See page 6 for a detailed explanation of DMX binary code.
3. XLR Input Jack - This jack is used to accept an incoming DMX
signal.
4. XLR Output Jack - This jack is used to send the incoming DMX
signal to another DMX fixture.
5. Power Indicator - This LED will glow when main power is applied.
For a more dramatic effect, link several Spiral Scans together.
Spiral Scan™
Linking
Linking:
Your fixture comes with a built-in controller. This controller
may be used to control up to 16 units when daisy-chained together in
a master-slave configuration. Any unit can function as either a “Master
Unit” or a “Slave Unit.” Link the units together using standard DMX
cable.
Spiral Scan™
Controls and Functions
DMX IN
DMX OUT
POWER
FUSE
GMA 5AMP
ON
1 2 3 4
ON
1 2 3 4 5 6 7 8 9
OPTIONS
START ADDRESS
1
6
5
4
3
2
7
Top Panel
Due to fog residue, smoke, and dust, cleaning the internal and external
optical lenses must be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside
casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days. Situation may very. If used heavily in clubs with lots of
fog, cleaning may be required more often.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the
unit in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Spiral Scan™
Cleaning
To next fixture or terminate
Controller “OUT” to fixture “IN”
