Architect
Model 1600 SE
Model 1601 SE
installer’s Guide
™
Quick hook-Up Guide
3
Experienced Installer’s Quick Hook-Up Guide
What follows are “Express” hook-up diagrams for profession-
als and experienced audio buffs.
The PFM bass-blocking filter comes factory set to 40Hz.
Don’t be afraid of leaving this filter turned on. We have found
over the years that a system actually sounds louder and has more
bass when the subsonic filter is used in the system.
Final adjustment of The Architect™ Model 1600 SE or Model
1601 SE’s speaker optimizer controls is best done with a one-
third octave real time analyzer and pink noise test signal, but it
can be done by ear, especially if you desire to emphasize certain
frequencies.
One final note: Make certain the warranty card is filled out
and mailed back to our factory. Comments received from these
warranty cards are one of the ways we keep improving our prod-
ucts.
Quick
installers checklist
Do any zones have
more than 2 speaker
pairs? – See Input Bus-
sing page 10.
Are there any odd
shaped rooms (like
Bathrooms) or outdoor
spaces? – Try using the
Mono feature Page 5.
Do you need more than
60 watts to a speaker?
– Refer to Amplifier
Bridging Appendix A.
Using the Ethernet
Control? The default IP
address for the browser
is http://192.168.0.1
Refer to Appendix B.
