background image

INTRODUCTION 

Congratulations on choosing an Archgard Gas Fireplace! 
 
The Optima 32-1 Direct Vent Insert is one of the most advanced Direct Vent Insert heater 
available today. It is solidly designed using the latest technology and manufactured to the 
highest quality. It is our aim to provide you with an appliance for many trouble-free years of 
reliable service.  
 
Some of the many features of your Optima 32-1 Direct Vent Insert are: 
 
Heater Classification 

The Optima 32-1 is classified as a heating appliance. Therefore, it 
uses Direct Vent safety technology and it is suitable for continuously 
operated zone heating. 

High Efficiency 

The Optima 32-1 has one of the highest efficiencies of any Direct 
Vent gas insert, which means that it is less expensive to operate. 

Adjustable Fan Speed 

Each Optima 32-1 insert comes complete with a heat activated 
circulation fan with a fully adjustable speed control. 

Adjustable Flame 

The flame aesthetics and heat output can be adjusted to suit the 
owner’s liking and heating needs. 

Solid Construction 

The Optima 32-1 is mainly constructed of 16 and 18 gauge 
galvanized and aluminized coated steel for long life and durability. 

Optional Accessories 

Check with your Authorized Archgard Dealer for a full complement of 
decorative accessories to suit your home’s décor and your tastes. 
Some of the accessories available are: 24K Gold Overlay (for the flat 
window), a variety of surrounds (faceplates) with gold, black or 
pewter trims and an overlay bay window that simply attaches to the 
front of your fireplace while leaving the flat glass door in place.   

Millivolt Control System.  The Optima 32-1 uses a gas control valve that is ready for an 

optional wall thermostat, or a hand-held “wireless” remote control. 

 

Please read this manual carefully prior to installation and operation of the appliance. 
Proper installation, operation and maintenance of the appliance will provide you with 
many years of enjoyment.  
 
We recommend you record the following information: 

 

Fireplace Model Number:   

OPTIMA 32-1  

  Serial Number:   

 

 
Date of Installation:   

 

 
Type of Gas Used by the Fireplace:    

  Natural Gas    

  Propane 

 
Dealer’s Name & Address:  

 

 

 
 

 

 

Dealer’s Phone Number: 

 

 

Summary of Contents for Optima 32-1










































Reviews: