25-BVI20N
–
3 5
•
Due to high temperatures, the appliance should be located out of traffic and away from
furniture and draperies
•
Children and adults should be alerted to the hazards of high surface temperature and stay
away to avoid burns or clothing ignition
•
Young children should be carefully supervised when they are in the same room as the
appliance
•
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with
this appliance and shall be installed for the protection of children and other at
-
risk
individuals
•
Clothing or other flammable material should not be placed on or near the appliance
•
Maintain adequate clearances around air openings into the combustion chamber
•
Flow of combustion or ventilation air must not be obstructed
•
Any parts removed or opened for servicing of the appliance must be properly replaced prior
to operating the appliance
•
The appliance must be inspected before use and at least annually by a qualified service
person. More frequent cleaning may be required due to excessive lint from carpeting,
bedding material, etc. It is imperative that the control compartments, burners and circulating
air passageways for the appliance be kept clean
•
Trim panels or surrounds shall not seal ventilation openings in the fireplace
CAUTION
•
FOR YOUR SAFETY
-
Do not install or operate your Archgard Euro 25 Gas Fireplace Insert
Heater without reading and understanding this manual. Any installation or operational
deviation from this instruction manual voids the Archgard Industries Ltd. Warranty and may
prove hazardous
•
Installation and repair should be done by a qualified service person. The appliance should be
inspected before use and at least annually by a professional service person. More frequent
cleaning might be required due to excessive lint from carpeting, bedding material, et cetera.
It is imperative that control compartments, burners, and circulating air passageways of the
appliance be kept clean
•
This appliance must be installed by a qualified gas installer and the installation must
conform to the installation codes
•
Provide adequate clearance around air openings of the appliance
•
Never obstruct front openings
•
Provide adequate clearances for proper operation and servicing of the appliance
•
This appliance must be properly connected to an approved venting system and must not be
connected to a chimney flue serving a separate solid fuel burning appliance
SAFETY