Archgard 25-BVI20N-3 User'S Installation, Operation And Maintenance Manual Download Page 38

 

 

 

This Limited Warranty is made by ARCHGARD INDUSTRIES LTD., hereinafter referred to as 

Archgard

”. 

Archgard warrants to the 

original purchaser of an Archgard gas burning fireplace (s) that the product will be free of defects in materials and workmanship under 

normal use and service, for a 

lifetime

”.

 

 

INCLUSIONS: 

LIFETIME LIMITED WARRANTY

 

 

All heat exchangers, combustion chamber, burner tubes and pans.  

 

 

Ceramic Fiber Logs and Ceramic Brick Panels against splitting or cracking.

 

 

Ceramic Glass against thermal breakage..

 

 

NOTE: Discoloration and some minor movement of certain parts are normal and are not a defect and therefore, not covered under 

warranty.  

 

The above will be covered 

parts & labor

” 

to the original purchaser for FIVE years and 

parts

” 

only thereafter from original date of pur-

chase.

 

 

INCLUSIONS: 

ONE YEAR LIMITED WARRANTY

” 

 

 

Blowers, fans and fan motors, wiring, rheostats and thermodiscs.

 

 

Rocker switches, spill switches and wiring to them. 

 

 

Gas control valves, pilot assemblies including thermopiles, thermocouples, electrodes, and igniters.

 

 

All 24 K gold trims and accessories against tarnishing.

 

All trim accessories against tarnishing and paint defects

 

The above will be covered 

parts & labor

”  

to the original purchaser for ONE year from date of purchase. 

 

 

EXCLUSIONS:

 

 

Archgard does not offer wall mounted thermostats, programmable thermostats (wiring for hook

-

up of said product), handheld remote 

controls, fireplace mantel (s), trims or tiles. 

 

 

Ember Material.

 

 

Tempered Glass is warranty for ONE year to the original purchaser from date of purchase.

 

 

Travel time or mileage to original purchasers residence. Archgard suggests that you pre

-

arrange travel expenses with your Authorized 

Archgard Dealer.

 

 

 

WHAT TO DO IN THE EVENT OF A PROBLEM:

 

 

Thoroughly read your manual.

 

 

If you cannot solve the problem, contact your Archgard Dealer or representative. 

 

 

When calling for help please have the following information: 

 

            

Model of your Fireplace

 

Serial Number

 

Place of Purchase                           

 

            Date of Purchase

 

Problem Description

 

 

NOTE: Warranty may be void if work is carried out by an unqualified person (s). Only original Archgard parts may be used. Please 

consult your Archgard dealer or representative if in doubt about a replacement part (s).

 

 

OBTAINING WARRANTY SERVICE:

 

To obtain warranty service, the original purchaser shall return the defective part (s) to the original authorized Archgard selling dealer 

transportation prepaid, along with the serial number of the appliance and proof of purchase. Any defective part, in our 

 

judgment, will be repaired or replaced at Archgard

s discretion. The dealer must obtain approval from Archgard before any 

 

repairs are made. 

 

 

WARRANTY LIMITATION:

 

THIS LIMITED WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED AS TO QUALITY, 

MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.

 

 

The appliance is only warranted for the use as intended by the installation and operating instruction and local building codes. The warran-

ty will not cover damage due to accident, misuse, abuse, alteration, improper installation or 

Acts Of God

”. 

 

This limited warranty is void unless the appliance is installed by a qualified installer, in accordance with the instructions 

 

furnished with the appliance. Some Provinces or States do not allow limitations on how long an implied warranty lasts, so the above limi-

tation may not apply to the original purchaser. Any damage resulting from defects in this product, is limited to the 

 

replacement of the defective part (s) and does not include incidental and consequential exposures sustained in connection with the prod-

uct. This includes facing (s),   mantle (s), cabinet (s), tile (s) or any other finishes resulting from removal of any gas appliance. This war-

ranty is limited to residential use only and gives the consumer specific rights. These rights may vary from State to State or Province to 

Province. 

 

ARCHGARD LIMITED WARRANTY 

Summary of Contents for 25-BVI20N-3













































Reviews: