background image

 

 
 

2 | 

P a g e

 
 

California Proposition 65 Warning: 

This product contains chemicals (lead) known to the state of California to cause cancer, birth defects and other 

reproductive harm. For more information: www.P65Warnings.ca.gov 

 
Warranty: 

Arcflash Labs, LLC. (hereinafter referred to as “Arcflash Labs”) warrants to the original purchaser these products to be free from defects in 

material and workmanship under normal conditions of use and service for a period of 30 days from date of shipment.  Arcflash Labs will, as its option, 
repair, replace or refund the purchase price of any products that prove defective within the warranty period, if such products are returned to Arcflash Labs 
in accordance with the warranty claim procedures set forth below.  REPAIR OR REPLACEMENT OF THESE PRODUCTS, OR REFUND OF THE PURCHASE PRICE 
AS PROVIDED UNDER THIS WARRANTY, IS THE BUYER’S EXCLUSIVE REMEDY. This exclusive remedy will not be deemed to have failed of its essential 
purpose so long as Arcflash Labs is willing and able to repair or replace any defective product, or refund the purchase price, in the prescribed manner.  In 
the event Arcflash Labs fails to provide the Buyer with free repair or replacement, or refund the purchase price as aforesaid, Arcflash Labs’ entire liability 
shall not exceed the amount paid by the Buyer to Arcflash Labs for its purchase of the defective product.  THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF 
ALL OTHER WARRANTIES NOT EXPRESSLY SET FORTH HEREIN, WHETHER EXPRESS OR IMPLED BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT 
NOT LIMITED TO ANY IMPLED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
 

Limitations:

 Products which are purchased from other equipment manufacturers and sold by Arcflash Labs as part of a system or on a resale basis will bear 

only the original manufacturer’s warranty.  The above warranty shall not apply to fuses, lamps or other items which are expendable by nature, unless 
otherwise provided. 
 
IN NO EVENT SHALL ARCFLASH LABS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, TORT, PERSONAL INJURY, PROPERTY, CONSEQUENTIAL OR 
OTHER DAMAGES, INCLUDING BUT NOT LIMITED TO DAMAGE TO OR LOSS OF PROPERTY OR EQUIPMENT, PHYSICAL INJURY, DEATH OR HARM TO 
GOODWILL OR BUSINESS REPUTATION DIRECTLY OR INDIRECTLY ARISING FROM THE SALE, HANDLING, OR USE OF THE PRODUCT, OR FROM ANY OTHER 
CAUSE RELATING THERETO.  Arcflash labs shall not be liable to the Buyer for any claims, demands, injuries, damages, actions or causes of action 
whatsoever based on negligence or strict liability.  Arcflash Labs shall have no liability of any kind under this Limited Warranty unless the Buyer 
commences an action against Arcflash Labs within 1 month of the date the cause of action accrues. 
 
Unless otherwise agreed in writing by an authorized representative of Arcflash Labs at Arcflash Labs’ headquarters in San Diego, California, the products 
sold hereunder are not intended for use in connection with any nuclear facility or activity.  If so used, in the event any damage, injury or contamination 
occurs, Arcflash Labs disclaims any responsibility of every kind, and the user of the products shall indemnify Arcflash Labs and hold Arcflash Labs harmless 
from any and all liability for any such damage or contamination whatsoever arising out of any such use, including liability in tort or strict liability. 
 

WARRANTY CLAIM PROCEDURE:

  In the event the products purchased hereunder prove defective, the Buyer shall notify Arcflash Labs’ Service Department 

in writing at its offices in San Diego, California of the claimed defect, and such notice shall include the model and serial number of each such product, as 
well as the number and date of invoice therefore.  Upon receipt of this information, Arcflash Labs will send notification to the Buyer as to the service 
arrangements and will provide written authorization and shipping instruction, and the Buyer shall return the products to Arcflash Labs, transportation 
prepaid, in accordance with such shipping instructions.  If, after inspection, Arcflash Labs determines the defect is a result of misuse, mishandling, 
installation, abnormal condition of operation, unauthorized repair or modification, or due to Buyer’s failure to install, maintain or operate the products in 
compliance with the written instruction, all necessary materials, labor and other expenses shall be for the account of the Buyer at Arcflash Labs’ standard 
repair rates.  Any products returned to Arcflash Labs for replacement shall become the property of Arcflash Labs. 
 
The Buyer shall be responsible for all costs of shipping, customs clearance and other related charges in connection with Arcflash Labs’ repair or 
replacement of products located outside the continental United Sates pursuant to this Limited Warranty. 
 
The validity, performance and interpretation of this Limited Warranty shall be governed by the internal laws (and not the laws of conflicts) of the State of 
California.  All disputes arising in connection with this limited Warranty shall be resolved, if not sooner settled, by a court of competent jurisdiction located 
in California, U.S.A. 
 
Updated: 08/2022 
 
Copyright © 2022 by Arcflash Labs, LLC.  All rights reserved.  Under copyright laws, neither the documentation nor the software may be copied, 
photocopied, reproduced, translated, or reduced to any electronic medium or machine readable form, in whole or in part, without the prior written 
consent Arcflash Labs, LLC except in the manner described in the documentation 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 

Summary of Contents for EMG-02


















Reviews: