24/EN
The first step to regroup the door is reinstalling
inner glass panel (2).
As illustrated in figure, place the chamfered
corner of the glass panel so that it will rest in the
chamfered corner of the plastic slot.
Inner glass panel (2) must be installed into the
plastic slot close the innermost glass panel (1).
When installing the innermost glass panel (1),
make sure that the printed side of the panel
faces towards the inner glass panel.
It is important to seat lower corner of inner glass
panel into the lower plastic slot.
Push the plastic part towards the frame until you
hear a "click".
Replacing the oven lamp
DANGER:
Before replacing the oven lamp, make
sure that the product is disconnected
from mains and cooled down in order to
avoid the risk of an electrical shock.
Hot surfaces may cause burns!
The oven lamp is a special electric light bulb
that can resist up to 300 °C. See
Technical
specifications, page 9
for details. Oven
lamps can be obtained from Authorised
Service Agents.
Position of lamp might vary from the figure.
If your oven is equipped with a round lamp:
1. Disconnect the product from mains.
2. Turn the glass cover counter clockwise to
remove it.
3. Remove the oven lamp by turning it counter
clockwise and replace it with the new one.
4. Install the glass cover.
Summary of Contents for 9629 MMB
Page 12: ...12 EN min ...
Page 13: ...13 EN min ...
