Dishwasher / User’s Manual
49 / 59 EN
Operating the product
3. Press Quick Wash key to store the
changes or press HomeWhiz key
to exit the language menu without
saving.
Factory Settings?
Proceed as indicated below to cancel
all of your personal settings and
restore the factory settings:
1 Press the Quick Wash key.
Following message will be
displayed upon pressing the key.
2. Press Quick Wash key to store the
changes or press HomeWhiz key
to exit this menu without saving.
When factory settings are restored,
settings will have the following values:
Language = Deutsch
Brightness = 2
Tablet = Off
* WLAN = Off
* WLAN Setup = Off
* Doormatic = On
* Active Self-Cleaning Filter = Off
* Inner Illumination = On
Volume = High
Water Hardness = 1
* These menus may not be available
depending on the model of your
machine.
Warning messages
Your machine will give you some
important feedbacks while it is running.
Check the filter
Take out and clean your filters as
explained in the "Maintenance and
cleaning" section when you get a
'check the filter' warning.
If there is water remained in the tank,
ensure that the water in the tank is
discharged by applying Programme
cancelation process. If water cannot be
discharged, clean any leftover deposits
that have piled up in the bottom of the
tank and blocked the water path.
Clean the interior of your machine
and the tank by running a prewash
programme without detergent or a long
washing programme with detergent
based on the degree of dirtiness.
C
Always make sure that
you scrape the large food
remnants on your dishes
into a dustbin using a fork,
paper towel or a tissue
before placing them into the
machine.
Salt indicator ( )
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt warning indicator
appears on the display of your
machine.
