Dishwasher / User’s Manual
47 / 59 EN
Operating the product
C
You will be asked for your
approval when changes are
made in "Language" or "
Factory Settings?" menus.
6. After making changes in the
“Language” setting or in the
“Factory Settings?” menu,
press one of the Extra Shining /
HomeWhiz keys in order the save
these changes. Following message
will be displayed upon pressing the
key.
Press Quick Wash key to save
the change. If you press the
HomeWhiz key without making any
change in the menu, you will switch
to the next setting menu and the
settings set will not be saved.
7. Press and hold the Lower Basket
TurboWash key for 3 seconds to
exit the “Settings Menu”.
8. “Exit settings 3”, “Exit settings 2”,
“Exit settings 1” will appear on the
Display Information line and you
will exit the Settings Menu after 3
seconds.
C
Time Delay and Start /
Pause / Cancel keys do not
have any function in the
"Settings Menu". Pressing
these keys has no effect.
Adjusting the Water Hardness
You must adjust the “Water Hardness”
level to one of the following values
that suits the properties of your water
mains.
C
Adjust the water hardness
level according to the
Water hardness level
instruction supplied with
your machine.
1. Lime-free
2. Very slightly limy
3. A little limy
4. Mediocre limy
5. Limy
6. Very much limy
Active self-cleaning filter
When you enable this function, your
micro filter will be cleaned by a special
system at the end of washing process
and it is made ready to use for the next
time. This cleaning process increases
the cleaning period of the micro filter
from 2 weeks to 3 months and thus
boosts the washing performance.
Employing this function in every
washing cycle is recommended in
order to get the most out of it.
There are two options, namely “On”
and “Off” for this function. It is set to
“Off” at the factory. You have to change
this from “Off” to “On” position if you
want to use the function. (This feature
may not be available depending on the
model you have purchased.)
