Installation
11 /35EN
Refrigerator/ User manual
3.3. Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the values
in the rating plate. Our company shall not be
liable for any damages that will arise when
the product is used without grounding in
accordance with the local regulations.
t&MFDUSJDBMDPOOFDUJPONVTUDPNQMZXJUI
national regulations.
t1PXFSDBCMFQMVHNVTUCFXJUIJOFBTZSFBDI
after installation.
t5IFWPMUBHFBOEBMMPXFEGVTFPSCSFBLFS
protection are specified in the Rating Plate
which is affixed to interior of the product. If
the current value of the fuse or breaker in
the house does not comply with the value in
the rating plate, have a qualified electrician
install a suitable fuse.
t5IFTQFDJGJFEWPMUBHFNVTUCFFRVBMUPZPVS
mains voltage.
t%POPUNBLFDPOOFDUJPOTWJBFYUFOTJPO
cables or multi-plugs.
B
WARNING:
Damaged power cable
must be replaced by the Authorized
Service Agent.
B
WARNING:
If the product has a
failure, it should not be operated
unless it is repaired by the
Authorised Service Agent! There is
the risk of electric shock!
3.4. Adjusting the feet
If the product stands unbalanced after
installation adjust the feet. Taking help from
someone to slightly lift the product will facilitate
this process.
B
WARNING:
First unplug the product.
Product must not be plugged in when
adjusting the feet. There is the risk of
electric shock!
Turn the front feet to balance the product. The corner
where the foot exists is lowered when you turn in the
direction of arrow and raised when you turn it in the
opposite direction.
3.5. Illumination lamp
Do not attempt to repair yourself but call the
Authorized Service Agent if the illumination lamps do
not go on or are out of order.
The lamp(s) used in this appliance is not suitable for
household room illumination. The intended purpose
of this lamp is to assist the user to place foodstuffs
in the refrigerator/freezer in a safe and comfortable
way.
3.6. Door open warning
(This feature is optional)
An audio warning signal will be given when the
door of your product is left open for 1 minute. This
warning will be muted when the door is closed or any
of the display buttons (if any) are pressed.
3.7. Transportation of the product
1.
Unplug the product before transporting it.
2.
Clean the interior of the product as recommended in
the “Maintenance and cleaning” section.
3.
Secure the shelves, accessories, crisper and etc. in
the product by adhesive tape before repackaging it.
C
Packaging must be tied with thick
tapes or strong ropes and the rules of
transportation printed on the package
must be followed.
C
Original packaging and foam
materials should be kept for future
transportations.
A
Packaging materials are dangerous
for the children. Keep packaging
materials
in a safe place away
from reach of the children.
