15 / 28 EN
Refrigerator / User Guide
Using the product
1. Fault Condition Indicator
This indicator (
) shall be active when your
refrigerator cannot perform adequate cooling or
in case of any sensor error. “E” shall be displayed
on the Freezing Compartment temperature
indicator and figures such as 1,2,3... shall be
displayed on the cooling compartment temperature
indicator. These figures provide information to the
authorized service on the error that has occurred.
Exclamation mark may be displayed when you load
warm food to the freezing compartment or keep
the door open for a long period of time. This is not
a fault, this warning shall be removed when the
food is cooled down or when any key is pressed.
2. Energy Saving (Display Off) Indicator
Energy saving function is enabled automatically
and the energy saving symbol () is displayed
when the door of the product is not opened or
closed for some period of time. When the energy
saving function is active, all symbols on the screen
other than the energy saving symbol shall be
turned off. When the energy-saving function is
active, pressing any key or opening the door will
deactivate the energy-saving function and the
display signals will return to normal. The energy-
saving function is a function activated ex-factory
and cannot be cancelled.
3. Wireless Key
HomeWhiz uses this key for remote connection to
your appliance through mobile application.
When pressed long (3 seconds) on the key, the
wireless connection icon on the display blinks
slowly (with the interval of 0,5 seconds). The
introduction of the home network to the product is
initialized this way.
When wireless connection with the product is
established, the wireless network icon (
) will
be lit continuously.
Connection may be activated/deactivated by press-
ing on this key following the completion of initial
setup. The wireless connection icon flashes (with
the interval of 0,2 second)
until the connection is established. When the con-
nection is active, the wireless network symbol will
be lit continuously.
If the connection cannot be established for a long
period, check your connection settings and refer to
the “Troubleshooting” section provided in the user
manual.
HomeWhiz application shall be used for wireless
connection. Installation steps are described on the
application during installation.
You may access the application by reading the
QR code available on the HomeWhiz label on the
product. Application is offered through App Store
for IOS devices, and through Play Store for Android
devices.
For detailed information please visit https://www.
homewhiz.com
4. Cooling Compartment Temperature Setting
Key
Allows setting of temperature for cooler
compartment. Pressing this key will enable the
cooling compartment temperature to be set at
8,7,6,5,4,3,2 and 1°C
5. Freezing Compartment Temperature
Setting Key
Temperature setting is made for cooler
compartment. When the key is pressed, the
temperature of the freezing compartment can be
set at -18,-19, -20, -21, -22, -23, -24 °C.
6. Support Service Key
Press this key for 3 seconds to activate/deactivate
the support service. Detailed information on the
support service is provided in the “Support Service
Feature” section.
7. Quick Freezing Key
When the quick freeze key is pressed the quick
freeze symbol (
) shall be illuminated and the
quick freeze function shall be activated. Freezing
compartment temperature is set to -27 °C.
Press the key again to cancel function. The quick
freezing function shall be automatically cancelled
after 48 hours. To freeze a large amount of fresh
food, press the quick freeze key before placing the
food in the freezer compartment.
