ARCC BROMPTON, User Manual, Page: 46 / 56

Trouble shooting guide
The e2-pod isn’t working
Check the battery is fully charged.
Check the battery is correctly clicked into position.
Ensure that the e2-pod is turned on. (Power button
edition)
Check brake switch function. Pull each brake lever
in turn, the corresponding red LED indicator should
illuminate on the brake switches when the brake is
applied.
The automatic hill and gradient
power detection doesn’t
deliver power when I go up a
hill or incline.
Check that A mode is selected.
Launch control isn’t working
Ensure you release the brakes and apply pressure to
the left pedal at the same moment when moving off.
Not enough pressure applied to the left pedal.
One or both brake switches are not working/faulty.
Pull each brake lever in turn, the corresponding red
LED indicator should illuminate on the brake switches
when the brake is applied.
Brake switch cable is disconnected. Reconnect it.
Torque sensor cable is disconnected. Reconnect it.
The e2-pod lever doesn’t
move/is locked
Use the security key provided to unlock the lever.
45