ARCC BROMPTON, User Manual, Page: 10 / 56

Washing and cleaning
your bike
When cleaning your bike - electric or non-electric -
do
not use a jet wash or high pressure hose to clean the
bike, e2-pod, battery, motor, bottom bracket or rear hub
(indicated by fig.1) as this will force water inside of it,
removing the grease and/or damaging any electronics,
causing premature failure. You should hand wash only
with a suitable bike cleaner or warm soapy water and a
damp cloth.
Whilst the e²-pod Intelligent Drive System has
been designed for use in all weathers, the electrical
components of the bicycle such as the motor,
bottom bracket, battery and the e²-pod must not be
submerged in water.
Battery and charger
See the accompanying Bosch battery and charger
manuals for recommendations on cleaning.
The charger must be unplugged from the mains outlet
socket before cleaning.
Bike frame and components
The battery should be removed before cleaning the
bike frame and its components.
After cleaning allow all components to dry off
completely before attempting to fit the battery to the
bike.
9