ARCC BROMPTON, User Manual, Page: 14 / 56

Front wheel fitting
1. Insert the wheel into the forks ensuring the drive washer is located on the motor axle, on
the inside of the forks with the dog at the bottom sitting inside the fork slot. Then fit the fork
supports, washers and wheel nuts to both sides (see above). The front mudguard bracket
must also be re-attached.
2. Ensure the wheel nuts are tightened to the correct torque as specified in the
Brompton Owners Guide.
Note: ensure this
drive washer is
orientated with
the drive dog at
the bottom facing
outwards.
13