Service Support Spirit
Unique Solution
WWW.ARCBRO.COM
Solution
:
Keep pressing
【
ARCING TEST
】
Button on the THC panel, If
【
ARCON
】
light is on , At the same time, there is has an output arcing signal on the THC board.
--Check ARCING Signal ,Keep pressing
【
ARCING TEST
】
Button, At the same time, Use
a multimeter to check.
If there is a ON between ARCSTART_1 and ARCSTART_2.
Prove that the THC is working;
If there is a OFF between ARCSTART_1 and ARCSTART_2.
Prove that the THC is Bad ,Please
change new THC;
Test CNC ARCING signal:
Keep pressing
【
Piercing
】
Button on the CNC panel, If
【
ARCON
】
light is on , At the same
time, there is has an output arcing signal on the THC board.
--Check ARCING Signal ,Keep pressing
【
Piercing
】
Button, At the same time, Use a
multimeter to check.
If there is a ON between ARCSTART_1 and ARCSTART_2.
Prove that the CNC is working;
If there is a OFF between ARCSTART_1 and ARCSTART_2.
Prove that the CNC is Bad ,Please
contact ARCBRO;
ARCING TEST
ARC ON Light