n
Zendt uw muziek en geluiden draadloos vanaf uw
Apple iPod®, iPhone® of iPad™ naar Arcam pro-
ducten die deze toepassing ondersteunen.
Instellingen voor het eerste gebruik
1. Plaats de zender in de iPod/iPhone/iPad
2. Druk op de ‘Associate’ toets en houd deze 3
seconden ingedrukt
3. Wacht tot de status LED begint te knipperen
4. Activeer de ‘Associate’ mode op het ontvan-
gende product (zoals de rDAC of de rCube) –
zie de handleiding van het betreffende product
voor meer details
5. Wanneer de koppeling geslaagd is kan u uw
muziek afspelen
6. Het tot stand brengen van deze koppeling is
alleen noodzakelijk wanneer de zender voor
het eerst in gebruik genomen wordt.
“Made for iPod,” “Made for iPhone” and “Made for iPad” mean
that an electronic accessory has been designed to connect
specifically to iPod, iPhone or iPad respectively, and has been
certified by the developer to meet Apple performance stand-
ards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
iPhone, iPad and iPod are trademarks of Apple Inc., registered
in the U.S. and other countries.
FCC Information (for US customers)
1. Product
This product complies with Part 15 of the FCC Rules. Op-
eration is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
2. Important notice:
do not modIFy thIS prodUCt
This product, when installed as indicated in the instruc-
tions contained in this manual, meets FCC requirements.
Modification not expressly approved by ARCAM may void
your authority, granted by the FCC, to use the product.
