Arcam rPhono, Connections And Quickstart Manual

Page: 11 / 84

E-7
English
rPhono gain
30dB 40dB 50dB 52dB
An MM input gain of 30, 40, 50 or
52dB can be selected to best match
your turntable and amplifier setup.
NOTE:
The MC input has a fixed gain
of 30dB in addition to the values
selected above.
Setting the gain to an incorrect
value may result in a distorted
audio output
Technical Specifications
Frequency response
Rumble filter OFF
20Hz-50kHz ± 0.2dB
-3dB at 7Hz
Rumble filter ON
45Hz-50kHz ± 0.2dB
-3dB at 20Hz, -13dB at 10Hz
Total Harmonic Dist Noise
(at 1kHz, 5V Out)
MC input, 30dB gain 0.005%
MM input, 30dB gain 0.0015%
System gain
MC input 60, 70, 80 or 82dB
MM input 30, 40, 50 or 52dB
Input impedance
MC input 50 - 550Ω + 1nF
MM input 47kΩ + 120, 220, 340 or 440pF
Equivalent input noise
(A-weighted, 40dB MM gain)
MC input 0.06µV RMS
MM input 0.5µV RMS
Output level
Nominal 0.5V RMS
Maximum 6V RMS
Power requirements (max) 12V DC, 2.0A
Dimensions (WxHxD) 194 x 44 x 124mm
Net weight 1.1kg
Supplied accessories
Power supply with interchangeable plugs
Stereo phono–phono cable
DIP switch and pot trim tool
User manual and registration card
E&OE. All specification values are typical unless otherwise stated
Output
Connect the rPhono output to the appropriate line input of your preamplifier or integrated amplifier.
Do not connect the rPhono output to the dedicated PHONO input available on some integrated amplifiers,
unless the amplifier is capable of reducing its input gain to normal line level (as it is the case with the Arcam
A19, A29, A39 and A49 integrated amplifiers).