O
ptions
E-20
Setting up the rWand Optional iPod transmitter
The Arcam rWand wireless Apple-compatible transmitter
means you can play music anywhere in the home from
your Apple iPod, iPhone or iPad.
You can purchase an Arcam rWand wireless transmitter for
your rCube to broadcast your iPod’s music wirelessly around
the house. To purchase the rWand please visit your local
ARCAM dealer or visit
www.arcam.co.uk
.
Before using the
rWand for the first time, you must associate it with a particular
rCube receiver.
You only need to perform this setup once. After an
association is established it is remembered, even if the
units are powered off.
1
Insert the rWand iPod transmitter into your iPod,
iPhone or iPad.
Plug the rWand into the docking connector at the
bottom of your Apple player.
2
Set the rWand to search for a rCube
Press the ‘associate’ button on the rWand
transmitter within 3 seconds of inserting it.
Hold the button until the transmitter LED
flashes rapidly indicating it is searching for an
association. For the next 30 seconds the rWand
will associate with any rCube also searching for
an association
(see step 4).
3
Turn on the rCube
Plug in and switch the rCube to on by pressing the rear
panel rocker switch to the on position and pressing the
top panel standby button, so that the power LED is blue.
4
Set the rCube to search for a transmitter
Press the wireless button to select the wireless input.
I
O
3
Release the button briefly, then press and hold.
The wireless LED will flash red as it searches for a
transmission. When the wireless LED on the rCube
glows continuous green, the association has been made.
The rWand remains in association mode for 30 seconds
in case any more cubes are being set up. Do not remove
the rWand from the iPod during this time. When
association is finished, the LED on the rWand will flash
briefly every five seconds. You will now be able to hear
music played from the iPod.
MENU
,
.
;4
MENU
,
.
;4
