Arcam FMJ CD17, Handbook

Page: 10 / 52

E-8
remote
control
The CR10 remote control
The CR10 is pre-programmed for use with the CD17
CD player and Arcam amplifiers such as the A28 and
A38.
The CR10 requires a clear line of sight to the front panel
display of CD17 to ensure reliable operation. Make sure
you have inserted the two AAA batteries supplied before
attempting to use the CR10.
CD player commands
DISP Cycles through the front panel display’s
brightness options (dim to bright, off).
INFO
Toggle track display mode (for details, see
page 7).
SHUFF Toggles random (‘shuffle’) play on and off
PROG
Allows the programming of a selection of
up to 24 tracks from a disc to play in any
order (for details, see page 7).
A–B
A-B repeat function (for details, see page 7).
RPT
Cycles through repeat options (track, disc,
etc.). For details, see page 7.
0
to
9
The numeric keys allow direct access to
individual tracks on the disc. To select
a track, press the corresponding keypad
button. For tracks greater than 9, enter the
digits in sequence. For example, to play
track 15, press and hold
1
until the number
on the display moves to the left, then press
5
.
1
Open/close disc tray
-
Toggles the mute function, if available.
By default this key always operates the AMP
Mute
PLAY
4
Play
PAUSE
;
Pause playback
STOP
<
Stop playback
VOL –
VOL +
Decrease (
VOL–
) or increase (
VOL+
)
amplifier volume
7
Fast search backwards
8
Fast search forwards
0
Press and release to skip back to the
beginning of the current/previous track.
/
Press and release to skip forwards to the
beginning of the next track.
 
 
 
Inserting batteries into the
remote control
1. Squeeze the tab and lift off the remote control’s
battery compartment cover.
2. Insert the two ‘AAA’ batteries supplied in the
proper direction, following the ‘
+
’ and ‘
–
’
marks in the battery compartment.
3. Replace the battery compartment cover,
locking the tab with a click.