E-21
E-20
English
Continuous power output (20Hz—20kHz at 0.2% THD), per channel
Both channels, 8Ω, 20Hz—20kHz
200W
Single channel, 4Ω, at 1kHz
400W
Harmonic distortion, 80% power, 8Ω at 1kHz
0.001%
Inputs
Phono (MM) cartridge:
Input sensitivity at 1kHz
5mV
Input impedance
47kΩ + 100pF
Frequency response (ref. RIAA curve)
20Hz—20kHz ± 1dB
Signal/noise ratio (Awtd) 50W, ref. 5mV input
80dB
Overload margin, 5mV at 1kHz
20dB
Inputs:
RCA type
XLR type
Nominal sensitivity
1V
2V
Input impedance
10kΩ
10kΩ
Maximum input
8V
15V
Frequency response
20Hz—20kHz ± 0.05dB
Signal/noise ratio (Awtd) 50W, ref. 1V/2V input
105dB
Preamplifier output
RCA type
XLR type
Nominal output level
1.15V
2.3V
Output impedance
47Ω
200Ω
Headphones output
Maximum output level into 600Ω
4Vrms
Output impedance
1Ω
Load range
16Ω—2kΩ
Accessory power output
Two accessory power cables supplied, provides two
2.1mm DC connectors
6V, 1A
12V, 1.5A
General
Mains voltage
110–120V~ or 220–240V~
Power consumption (maximum)
1kW
Dimensions W x D x H (including feet)
433 x 425 x 171mm
Weight (net)
19.7kg
Weight (packed)
21.4kg
Supplied accessories
Mains lead
CR902 remote control
2 x AAA batteries
Accessory power cable
E&OE
NOTE:
All specification values are typical unless otherwise stated.
A49
specifications
Continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.
Inputs
Phono (MM) cartridge:
Input sensitivity at 1kHz
5mV
Input impedance
47kΩ + 100pF
Frequency response (ref. RIAA curve)
20Hz—20kHz ± 1dB
Signal/noise ratio (Awtd) 50W, ref. 5mV input
80dB
Overload margin, 5mV at 1kHz
20dB
Inputs:
RCA type
XLR type
Nominal sensitivity
1V
2V
Input impedance
10kΩ
10kΩ
Maximum input
4.6V
8.2V
Frequency response
20Hz—20kHz ± 0.05dB
Signal/noise ratio (Awtd) 50W, ref. 1V input
105dB
Preamplifier output
RCA type
XLR type
Nominal output level
1.15V
2.3V
Output impedance
47Ω
200Ω
Headphones output
Maximum output level into 600Ω
4Vrms
Output impedance
1Ω
Load range
16Ω—2kΩ
Accessory power output
Two accessory power cables supplied, provides two
2.1mm DC connectors
6V, 1A
12V, 1.5A
General
Mains voltage
110–120V~ or 220–240V~
Power consumption (maximum)
300W
Dimensions W x D x H (including feet)
433 x 410 x 171mm
Weight (net)
8.7kg
Weight (packed)
10.4kg
Supplied accessories
Mains lead
CR902 remote control
2 x AAA batteries
Accessory power cable
E&OE
NOTE:
All specification values are typical unless otherwise stated.
C49
specifications
Continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.
