manualshive.com logo in svg

ARCAIR N6000 Automatic System, Safety And Operating Instructions Manual

Share
Download
ARCAIR N6000 Automatic System Safety And Operating Instructions Manual Download Page 2

WE APPRECIATE YOUR BUSINESS!

Congratulations on your new Arcair

®

 product. We are proud to have 

you as our customer and will strive to provide you with the best 
service and reliability in the industry.  This product is backed by our 
extensive warranty and world-wide service network. To locate your 
nearest distributor or service agency call 800-426-1888, or visit us 
on the web at www.tweco.com.  

This Manual has been designed to instruct you on the correct 
installation and use of your Arcair

®

 product. Your satisfaction with 

this product and its safe operation is our ultimate concern. Therefore, 
please take the time to read the entire manual, especially the Safety 
Precautions. They will help you to avoid potential hazards that may 
exist when working with this product.

YOU ARE IN GOOD COMPANY!

The Brand of Choice for Contractors and Fabricators 

Worldwide. 

 Arcair

®

 is a Global Brand of Carbon-Arc Gouging Products for 

Thermadyne Industries Inc. We manufacture and supply to major 
welding industry sectors worldwide including; Manufacturing, 
Construction, Mining, Automotive, Aerospace, Engineering, Rural 
and DIY/Hobbyist. 

We distinguish ourselves from our competition through market-
leading, dependable products that have stood the test of time. We 
pride ourselves on technical innovation, competitive prices, excellent 
delivery, superior customer service and technical support, together 
with excellence in sales and marketing expertise. 

Above all, we are committed to develop technologically advanced 
products to achieve a safer working environment within the welding 
industry.

Summary of Contents for N6000 Automatic System





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands