5692 FRESCA DRIVE, LA PALMA, CA 90623 | 800.585.5957 | ARCADIACONTRACT.COM
Step 8: To install the seats, tilt the seat slightly upward making sure the ¼-20 machine screws underneath the
seat cushion slide into the notches. Push the seat cushion down until it is flat against the seating unit
(Figure H).
Step 9: To install the backs, align the four z-brackets on the back rest with the four z-brackets on the seating
units and gently push down until the back is flat on the top of the seat (Figure I).
Step 10: To attach the table top, first place the base approximately 34.5” from the base plate to the bottom of
the plinth. Place the table on top of the base and L-bracket and align the holes to the pre-inserted
threaded inserts. Secure with (7) ¼-20 x 1” hex bolts [A] (Figure J)
If you require additional assistance, please contact Arcadia Client Services at 800.585.5957.
FIGURE I
FIGURE H
FIGURE J
[A] ¼-20 x 1” hex bolts, 7
