5692 FRESCA DRIVE, LA PALMA, CA 90623 | 800.585.5957 | ARCADIACONTRACT.COM
Step 3: Once the two seating units are built, face them approximately 41.5” away from each other
(measurement is taken from bottom front of both plinths). Place the front panel in-between the two
seating units and secure the bottom using (4) 5/16-18 x 2” Hex bolts [A], two per seat, from inside
the seat. Also, secure the top portion of the front panel by screwing in (2) wood screws [E] through the
metal L-bracket, one per side (Figure C).
Step 4: Align the small accent tier attachment pins to the top of the seating unit bushings and gently push
down to secure. Repeat the same process to install the long accent tier (Figure D).
continued next page
FIGURE C
seating
units
dimension taken
from here
back panel
FIGURE D
accent tiers
[A] 5/16-18 x 2” hex bolts, 4
[E] Wood screws, 2
only included with
table model
