If the sound volume is setup at “Mute”, when chime catches a signal from the paired transmitter, the LED light starts to flash for
about 12 seconds. When the receiver catches another signal from transmitter within the 12 seconds, LED light flashing will stop for
about 1 second and continue to flash.
When pairing the transmitter with LMLR-710, no matter the sound volume is High, Medium ,Low or Mute, it still can be manually adjusted to
any sound volume with last ringtone when normal operation.
APPLICATION IN BELOW EXAMPLE:
With transmitter:
LMLT-711
(push unit door chime transmitter)
＊
Setup with ringtone 1.
＊
Fix LMLT-711 on the outside wall.
＊
When people push the unit button, the signal transmits
to LMLR-710 to make ringtone 1 sounded as door bell.
LMDT-609
(motion detector transmitter)
＊
Setup with ringtone 2.
＊
Fix LMDT-609 on the wall outside of the room or at the entrance of the door.
＊
Put LMLR-710 in the up-stair room.
＊
When people walk inside the house passing through LMDT-609, it detects body movement and sends signal to LMLR-710 to make ringtone
2 sounded as an alert.
