- Delete all memory settings at the same time
On the Receiver (chime unit) press the “Learn” button, hearing a “Du” sound and holding with the button for about 6 seconds till a second “Du”
sound with LED light flashes.
Release the “Learn” button, and press shortly the “Learn” button again, no matter sound volume is setup at any volume level or mute mode,
once the deletion is completed, the receiver will indicate a “Du-Du” sound to confirm, LED light does not flash.
All memories are deleted once at the same time.
※
Press “Learn button” of chime receiver
With LMLT-711 With LMDT-609 With LMST-606
Operating transmitters (such like LMLT-711, LMDT-609 and LMST-606) and receiver chime unit:
If the sound volume is setup at “High”, “Medium” or “Low” level, when chime catches a signal from the paired transmitter and give sound
ringing while LED light is at the same time and continuing flashing for about 12 seconds,
the receiver chime will re-act another sound if
catching another signal from transmitter upon the prior sound is ended although the LED light flashing is still.
