Mounting the bell push button by screwing
Unclip the cover from the bell push unit and using the 2 holes on the back of the bell as a template,
mark and drill the fixing holes and then attach the bell push using the screws provided.
Close back the front cover to complete the whole push button bell transmitter.
LMLR-710 Receiver (chime)
Simply plug in receiver into wall outlet.
HOW TO SET CODE: Learning Function
To start, program the Transmitter (bell push unit) with the Receiver (chime unit).
Plug receiver into wall outlet.
Firstly choose the desire ringtone.
Press once on the “Learn” button of the Receiver (chime unit), “Du” sound is heard, LED flashes slowly.
Then, press the push button of bell push unit LMLT-711 (or slide to “SET” position of button on LMDT-609 or separate parts of LMST-606 as
“LEARN” code) to send signal to the receiver chime.
No matter sound volume is setup at any volume level or mute mode, once the pairing is completed, the receiver will indicate a “Du-Du” sound
to confirm, LED light does not flash.
Although learning process is setup at “Mute” mode, after turning to H-M-L volume level selection, ringtone programmed can still be sounded.
Selected ringtone and the transmitter are programmed in one of the memory of LMLR-710 at the same time.
If not process pairing of transmitter and receiver within about 15 seconds after pressing “Learn” button, automatically leaving learning mode
after the 15 seconds.
Repeat procedure with different ringtone for different transmitter setting.
When 4 memories are fully programmed, receiver will make “Du-Du-Du-Du” sound.
.
HOW TO DELETE CODE:
- Delete individual setting
Press the “Learn” button once on the Receiver (chime unit), “Du” sound is heard, the LED flashes slowly.
Then, press the push button of bell push unit LMLT-711 (or slide to “DEL” position of button on LMDT-609 or “CLOSE” parts of LMST-606 as
“DELETE” code) to send signal to the receiver chime.
No matter sound volume is setup at any volume level or mute mode, once the deletion is completed, the receiver will indicate a “Du-Du”
sound to confirm, LED light does not flash.
Repeat steps to delete single memory from transmitters.
