ARC FLEX 2JB-VRX Instruction Manual Download | Manualshive

Page: 40 / 71

background image

Flex 2JB-VRX Instruction Manual

June 2022 v1.0

Page 39 of 70

4.2.6.4 System Channel Programming

Tandems, random access, pitch & catch, t-type, and multi-receiver configurations
“cannot” set to unassigned channel.

1) Press the ENTER button to enter system channel setting (cursor shown next to

UNASSIGN

*

or the 2-digit channel value

**

).

2) Press the UP/DOWN buttons to scroll and select UNASSIGN or channel value as a

whole (channel 1~62).

3) Or press the ENTER button again to change the 2-digit channel value individually

(cursor shown under the first digit to the left). Press the UP/DOWN buttons to scroll
and select, and then the ENTER button to go to the next digit to the right. Press the
ENTER button repeatedly to cycle through the 2-digit channel value. Press the
UP/DOWN buttons to change value.

4) Press the BACK button to return to step #1 above. Press it again to go back to

System Channel Programming (cursor shown next to CHANNEL).

5) Press the UP/DOWN buttons to scroll through other system settings.

* Make sure the transmitter is also set to Unassigned Channel Scheme.

** Make sure the transmitter channel is identical to the receiver channel.

4.2.6.5 Auto-Scanning Programming

Auto-scanning function is required for pitch & catch, tandems, and random access
operations.

1) Press the ENTER button to enter channel scanning setting (cursor shown next to

the 2-digit channel scanning value).

2) Press the UP/DOWN buttons to scroll and select the number of channels to be scanned

when the receiver is in standby mode (maximum 12 channels).

3) Press the BACK button to go back to Auto-Scanning Programming (cursor shown

next to CH SCAN).

4) Press the UP/DOWN buttons to scroll through other system settings.

* When set to 2-channel scanning, the receiver will scan the channel set in the receiver

(channel X) and the next channel up (channel X+1). When set to 3-channel scanning,
the receiver will scan the channel set in the receiver (channel X) and the next 2 channels
up (channel X+1 and X+2 ).

>CHANNEL
UNASSIGN

UP DOWN ENTER BACK

>CH SCAN
01

UP DOWN ENTER BACK

«
...
38
39
40
41
42
...
»

Summary of Contents for FLEX 2JB-VRX








































































Reviews:

No comments

Related manuals for FLEX 2JB-VRX

Brand: Danfoss Pages: 7

Brand: jbc Pages: 8

U1000 iQpump Drive

Brand: YASKAWA Pages: 426

Brand: YASKAWA Pages: 26

Brand: YASKAWA Pages: 210

Z1000 CIMR-ZU*A Series

Brand: YASKAWA Pages: 400

Z1000 CIMR-ZU*A Series

Brand: YASKAWA Pages: 466

Brand: µ-Dimension Pages: 48

Brand: µ-Dimension Pages: 2

Brand: Sven Pages: 6

Brand: Ultraflex Pages: 48

Brand: Botex Pages: 36

Brand: YASKAWA Pages: 38

Brand: Madas Pages: 48

Brand: Zamel Pages: 2

Brand: EP Solar Pages: 3

WISE-2841 Series

Brand: ICP DAS USA Pages: 326

Limitorque LTQ008

Brand: Flowserve Pages: 41

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands