ArC Instruments ArC ONE Control, User Manual, Page: 17 / 32

16
®
ArC Instruments Ltd.
Tag Description Observation
F R X V= V
read
A read operation recorded
following Read All .
X
represents the read type
employed:
0. Classic
1. TIA
2. TIA4P
V
read
represents the reading
voltage (in V).
Data point is not recorded in
the Device History panel.
V
read
is also recorded in the
Amplitude column.
PulseWidth is recorded as 0.
S R X V= V
read
A read operation recorded
following Read Single . All
other indicators identical to
above.
Data point is displayed in
Device History panel.
PulseWidth is recorded as 0.
P Pulse applied through the
+Pulse or – Pulse directives in
the Manual Operations panel
of the interface.
The ‘Resistance’ field contains
the resistance of the target
device as read immediately
after the application of the
pulse. Compare to the value
read before the pulse to
quantify the change in
resistance elicited by this pulse.
CT_s Start point of a CurveTracer
measurement.
Resistance represents the
resistance of the device read at
V
read
=Amplitude.
PulseWidth is recorded as 0.
CT_i_
x
Intermediate data points
during a CurveTracer
measurement.
x
represents the cycle number.
Same as above.
CT_e End point of a CurveTracer
measurement.
Same as above
FF_s Start of a FormFinder
measurement.
The ‘Resistance’ field contains
the resistance of the target
device as read immediately
after the application of the
pulse. Compare to the value
read before the pulse to
quantify the change in
resistance elicited by this pulse.
FF_i Intermediate point of a
FormFinder measurement
Same as above
FF_e End point of a FormFinder
measurement.
Same as above
SS_s Start of a SwitchSeeker
measurement
The ‘Resistance’ field contains
the resistance of the target
device as read immediately
after the application of the
pulse. Compare to the value
read before the pulse to
quantify the change in
resistance elicited by this pulse.
SS_i Intermediate point of a
SwitchSeeker measurement
Same as above
SS_e End point of a SwitchSeeker
measurement
Same as above
RET_s Start of a Retention
measurement.
READ voltage shown in
‘Amplitude’ field.