www.matermacc.it
Use and maintenance handbook
Page 28
•
Immediately clean all fertilizer or other chemical/biologi-
cal product fell on the frame or on the fixing U-bolts in
the respect of all the safety regulations supplied at the
purchase of this product.
6.2. GREASING
Using a designated greasing pump, grease the points indica-
ted by the symbols:
58280018
58280017
Only use a manual greasing pump so as to avoid breaking the
bearing seals and the grease pipes.
6.3. FINTERVENTIONS
FREQUENCY
This paragraph contains information on the periods of in-
terventions for some of the operations to be performer to
maintain the perfect functioning of the soling machine. The
frequency listed is purely informative and may be different
on the base of the use, environment, seasonal matters, etc…
NEW MACHINE
•
Control the tightening of all the screws and nuts, control
that all the transmissions are free to operate.
START OF THE SOWING SEASON
•
Check the state of use of the equipment by starting the
machine on unloaded.
DAILY
•
Wash with water the soling machine, especially those
parts in contact with the chemical products like tanks,
distributors, distribution pipes.
•
Control that there is no residuals of chemical products in-
side the distribution parts since these may cause blocks
and/or malfunctioning.
WEEKLY
•
Verify the state of the transmissions;
RESTING PERIOD
•
At the end of the season, or in case of a long period of
unused, it is suggested to:
•
Wash the equipment abundantly with water and in par-
ticular the tanks of chemical products and then let dry.
•
Control all of the parts carefully and replace when dama-
ged or old.
•
Tighten up all screws and nuts.
•
Oil the Easy-set guide, all of the transmission chains, lu-
bricate all the non-painted parts.
•
Protect the equipment with a cloth and put in a dry and
stable area, outside of the reach of unauthorized person-
nel.
•
Maintain clean from materials that may obstacle the
sowing parts like dirt, rocks or roots, grass, etc… and
that may cause the obstruction of the sowing tool, the
malfunctioning of the anti-plough disk or the blocking
of the compression wheels.
•
Performing these simple operations will be very advan-
tageous since at the start of a new season the equipment
will be in perfect conditions.
Summary of Contents for Unica Super
