Use and Maintenance Manual
Page 17
•
If fully-loaded or semi-loaded equipment blocks the vis-
ibility of the signalling devices and illumination of the
tractor, these devices must be adjusted on the equip-
ment, in compliance with the relevant highway code.
When transporting the machine
on the road, the hopper must be
empty and travel at a maximum
speed of 25 Km/h.
5.
BEFORE USE
Verify that during the work, all the
machine parts function correctly.
Please note that most accidents
and damages are caused by slack-
ening of the fixing parts.
•
As there is a general settling of all the mechanical parts
and the hydraulic connections during the first period of
use, it is essential that inspections are carried out on the
machine with maximum precision.
•
Before using the machine, make sure that no animals or
people are standing within the working area.
•
it is strictly prohibited to take off and/or modify the pro-
tective devices on the machine.
•
Do not use the machine when ill, tired or under the effect
of medications, drugs or alcohol.
•
Before using the machine, it is essential to learn the lay-
out of the controls on the panel and their function.
•
While opening or closing the folding frame, do not stand
in the vicinity of the machine for any reason whatsoever.
•
The machine must be used by a single operator driving
the tractor.
5.1. CONTROLS
All the controls are highlighted by the specific labels indicat-
ing their function and explaining their actions and positions
in the cabin through pictorials.
5.2. VISIBILITY
The working areas can be checked through the tractor rear-
view mirrors and within the operator’s range of vision.
CAUTION - driving in reverse gear
may create blind spots which are
not visible through the rear mir-
rors
Summary of Contents for MEK-X250
Page 2: ......
Page 4: ...Use and Maintenance Manual...
Page 38: ...Use and Maintenance Manual Page 38...
