ARBORJET AccuFlo 070-3100, User Manual, Page: 7 / 18

Before Your First Application…
Arborjet strongly recommends testing your equipment with water
or CLEAN-jet™ before attempting to inject any of our approved
Formulations.
If the box your kit came packaged in does not have security tape, or
appears to have been opened or tampered with, do not use the
equipment, and contact your Arborjet Distributor for replacement
instructions.
Our Quality Control procedures include testing fittings with a
torque wrench, calibrating the Cylinder, and using a checklist to
perform an audit of contents for every kit that ships out of our
facility. The checklist is initialed by the assembler and supervisor
and included with your completed kit for your reference.
We understand that no measure of Quality Control can mitigate
every potential issue that might arise during assembly and
shipment, so a final “dry” run with water or CLEAN-jet
™
will
confirm fittings are sealed and eliminates the potential of losing
valuable product if a leak or failure is detected.
- Arborjet Production Team
AccuFlo Soil Injector ISD
Training Manual