ARBORJET AccuFlo 070-3100, User Manual, Page: 12 / 18

Cleaning the AccuFlo Soil Injector ISD System
CLEAN-jet Solution is an all-purpose cleaner and
lubricant suitable for all Arborjet injection devices.
Recommended Flushing Process
1. Dispose of any remaining product in the FlowZone backpack according to
product label or SDS sheet instructions
2. Pour around a half gallon of clean water, and 2-3oz of CLEAN-jet into the
backpack sprayer
3. Set the dose sizer to 300mL (max capacity)
4. Disconnect the Drain Line from the bulkhead fitting
5. Place injection end of lance into a bucket
6. Initiate the fill and inject cycle until water runs clear.
7. Store AccuFlo Soil Injector ISD Lance and Backpack in a secure location
protected from the elements in above-freezing conditions.
***FREEZE WARNING***
Even after flushing the system, some liquid may still remain in the cylinder which
can freeze, causing the cylinder to rupture. If you are unable to store the device
in above-freezing conditions, refer to our troubleshooting guide for instructions
on how to completely drain the device.