Arbor Technology Gladius G1052C, User Manual, Page: 101 / 106

- 87 -
BIOS
5.3. Security
InsydeH20 Setup Utility Rev. 5.0
Advanced Security Power Boot Exit
Main
Supervisor Password Not Installed
Set Supervisor Password
Change Values F5/F6
Select

SubMenu Enter
Select Item
Select Menu
F1
Exit ESC
Help Setup Defaults F9
Save and Exit F10
Install or Change the password
and the length of password must
be greater than one character.
The featured setting is:
Setting Description
Set Supervisor
Password
To set up the password for supervisor. Length of password must be
greater than one character.
Changes will be saved after selecting “Save and Exit”.