Arbor Technology Gladius G0975, User Manual

Page: 31 / 66

- 15 -
Getting Started
2.2 Installing Memory Card
The computer has a microSD card slot. You can insert a microSD card to
provide additional storage space or use it for file transfer.
To install a microSD card to your computer:
1. On the left side of the computer, open the upper rubber cover and locate
the microSD card slot.
2. Position the card as the graphic indicates.
3. Fully insert the card into the slot until it clicks into place.
4. Close the microSD card slot cover.
2.3 Installing/Replacing the Extenal Battery Pack
The computer comes with an internal and an external battery pack. The internal
battery pack is a configue-to-order service and is not allowed for installing or
replacing by yourself. Do NOT disassemble the internal battery pack or your
warranty will be void. But you can install or replace the external battery pack if
needed. To do so, follow the steps below:
1. Turn off the computer and disconnect the computer from the external
power.
2. Remove any peripheral devices connected to the computer.
3. Place the computer face-down on a flat surface.
4. Find the battery chamber on the rear of the computer. Loosen and remove
the screws securing the battery chamber cover.