Arbor Technology FPC-7700 Series, User Manual

Page: 94 / 145

- 82 -
BIOS
5.2.1. ACPI Settings
The submenu ACPI Settings enable users to change the system’s ACPI
(Advanced Configuration and Power Interface) configuration by the following
settings:
ACPI Settings
Enable Hibernation [Enabled]
ACPI Sleep State [S1 only(CPU Stop C...)]
AMT Configuration [ATX]
Enables or Disables System
ability to Hibernate (OS/S4
Sleep State). This option may
be not effective with some OS.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Advanced Chipset Boot Security Save & Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main
→←
: Select Screen
↓↑
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Setting Description
Enable Hibernation
Enables/disables the system to/from hibernation (OS/S4
Sleep State).
This option may not be effective with some OS.
Options available are Enabled (default) and Disabled .
ACPI Sleep State
Sets the ACPI sleep state for the system to enter when the
suspend button is hit.
Options available are Suspend Disabled , S1 only (CPU
Stop Clock) and S3 only (Suspend to RAM) .
S1 only (CPU Stop Clock) is the default.
Power-Supply Type
Sets the power-supply type.
Options available are AT and ATX (default).
Note this setting should be consistent with jumper J1 to
prevent possible conflict. See 3.2.1. Jumpers on page
22
for J1 jumper setting.