Arbor Technology FPC-7700 Series, User Manual

Page: 122 / 145

- 110 -
Appendices
B: Watchdog Timer (WDT) Setting
WDT is widely used for industry application to monitor the activity of CPU.
Application software depends on its requirement to trigger WDT with adequate
timer setting. Before WDT time out, the functional normal system will reload
the WDT. The WDT never time out for a normal system. The WDT will not be
reloaded by an abnormal system, then WDT will time out and auto-reset the
system to avoid abnormal operation.
This computer supports 255 levels watchdog timer by software programming
I/O ports.
Below is an assembly program example to disable and load WDT.
Sample Codes:
/*----- Include Header Area -----*/
#include “math.h”
#include “stdio.h”
#include “dos.h”
#define SIO_INDEX 0x4E /* or index = 0x2E */
#define SIO_DATA 0x4F /* or data = 0x2F */
/*----- routing, sub-routing -----*/
void main()
{
outportb(SIO_INDEX, 0x87); /* SIO - Enable */
outportb(SIO_INDEX, 0x87);
outportb(SIO_INDEX, 0x07); /* LDN - WDT */
outportb(SIO_DATA, 0x07);
outportb(SIO_INDEX, 0x30); /* WDT - Enable */
outportb(SIO_DATA, 0x01);
outportb(SIO_INDEX, 0xF6); /* WDT - Timeout Value :
5sec */
outportb(SIO_DATA, 0x05);
outportb(SIO_INDEX, 0xFA); /* WDOUT - Enable */
outportb(SIO_DATA, 0x01);
outportb(SIO_INDEX, 0xF5); /* WDT - Configuration */
outportb(SIO_DATA, 0x31);
outportb(SIO_INDEX, 0xAA); /* SIO - Disable */
}