5
1
Transport and handling
1.1
Transport
POP 310 polishing machine is delivered mounted to a pallet packed in protective
packing.
1.2
Handling
POP 310 polishing machine can easily be ported within the packing it is delivered in. If
the polishing machine is mounted to a pedestal, please make sure the pedestal is
safely bolted to the pallet.
1.3
Placing
Placing of the machine must take place on a firm and level surface. Now secure the
polishing machine to the work table or the floor by using the four holes in the base
used for mounting the machine to the pallet.
Please wire the machine according to the given voltages stated in this manual and on
the motor sign. Please see wiring diagram (see section 7.3).
Check for correct direction of rotation on the motor. All wiring must be performed by
an authorized electrician.
Fig.: 1.1
Before start operating please check if the polishing discs (A) (see
fig.: 1.1
) are firmly
secured to the rotor. The polishing disc is mounted when the machine is
disconnected. The polishing disc (A) must rotate freely without being loose.
Checks and adjustments are only to be performed when the machine is
disconnected.
First time the machine is started up please allow it to run at max speed for 5 minutes
before use. Make sure to be in a safe distance from the machine while it is running
for the first time.
