Encoding Monitor
Operations Manual
Document # 1050-1081
Rev. J
2007 Arbitron Inc
16
7.6.
N
O
E
NCODING
M
ESSAGES
If a valid code is not detected in the program material, the status port sends out the no
code message:
<NOTE@P[000x][Encoding not detected]>
where x = 0 - 9.
A new output line is displayed every 20 seconds. The number of each line ( i.e. 0001,
0002) is output to show activity on the line, since the first portion of this message may
not change.
If a code is detected in the program material, but the detected code is not one of the
identification codes programmed into the unit, the status port sends out the unknown
station message:
<NOTE@P[000x][Unknown Station]>
where x = 0 - 9.
A new output line is displayed every 20 seconds. The number of each line ( i.e. 0001,
0002) is output to show activity on the line, since the first portion of this message may
not change.