3 Bench Measurement
10
Figure 6.
Using a caliper or similarly accurate measurement method
(i.e., able to take accurate measurements within 0.04mm [0.0015”]),
measure the distance from the shoulder of the bearing journal to
the ring gear mounting face (shown as ‘
A
’ in Fig. 5.) and record this
measurement as ‘
A
’.
Measure the thickness of the factory shim removed from the end of
the differential carrier (shown as ‘
B
’ in Fig. 5.) and record this
measurement as ‘
B
’.
Measure the distance from the
Air Locker
bearing shoulder to the
ring gear mounting face (shown as ‘
C
’ in Fig. 6.) and record this
measurement as ‘
C
’.
AIR LOCKER DIFFERENTIAL
