background image

 

20-5-98 

Page 

of 

4      

3782549

 

 

If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state. 

Head Office – ARB corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807 

WA:

(08) 9244 3553  

NSW:

 (02) 9821 3633  

ACT:

 (02) 6280 7475  

SA:

 (08) 8244 5001  

QLD:

 (07) 3872 3872  

NT:

 (08) 8947 2262  

TAS:

 (03) 6331 4190

 

JEEP CHEROKEE ARB WINCH BULL BAR 1997 ON 

No 3450080 

 

 

WARNING 

FOR VEHICLES EQUIPPED WITH SRS AIRBAG 

WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT 

PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG. 

 

TAKE NOTE OF THE FOLLOWING: 
 

 

THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE 
HARDWARE SUPPLIED. 

 

 

DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN THOSE SPECIFIED 
BY ARB. 

 

 

DO NOT REMOVE LABELS FROM THIS BULL BAR. 

 

 

THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY. 

 
FITTING KIT No 6171262 
 

USE PART 

No 

QTY 

DESCRIPTION 

CONTROL BOX  BRACKET 

3751564 

BRACKET CONTROL BOX  

TO BULL BAR 

6151021 

BOLT M8 X 1.25 X 20mm 

 6151132 

NUT FLANGE M8 X 1.25 

 4581044 

WASHER FLAT M8 X 17 X 1.2 

WINCH TO BULL BAR 

6151110 

BOLT UNC 5/8 X 6” GRADE 8 

 6151140 

NUT UNC 5/8 NYLOC 

 4581051 

WASHER FLAT 5/8” 

 6151074 

BOLT UNC 3/8 X 1 ¾” GR5 

 6821110 

RUBBER GROMMET  

BULL BAR TO CHASSIS 

3193540 

PLATE - CAPTIVE NUT ASSY 

 4581049 

12 

WASHER FLAT 1/2" X 1 1/8" X 12G 

 4581050 

WASHER SPRING 1/2" X 1/8" X 1/8" 

 4581040 

WASHER FLAT M10 

 4581048 

WASHER  SPRING M10 

 6151071 

BOLT UNC 3/8 X 1” 

 6151100 

BOLT UNC 1/2X11/2” CLASS 8 

 6151138 

NUT UNC ½” 

 5846267 

PACKER 

No PLATE BRACKET, 

3751485 

BRKT NUMBER PLATE  

NUMBER PLATE AND  

6151017 

BOLT M6 X 1.0 X 16mm 

INNER GUARD 

6151046 

WASHER FLAT 6mmZP 

 6151128 

NUT FLANGE M6 X 1.0 

 3500080 

ARB INDICATOR KIT 

 

 

Summary of Contents for 3450080

Page 1: ...VEHICLE MAKE OR MODEL OTHER THAN THOSE SPECIFIED BY ARB DO NOT REMOVE LABELS FROM THIS BULL BAR THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY FITTING KIT No 6171262 USE PART No QTY DESCRIPTION CONTROL BOX BRACKET 3751564 1 BRACKET CONTROL BOX TO BULL BAR 6151021 2 BOLT M8 X 1 25 X 20mm 6151132 2 NUT FLANGE M8 X 1 25 4581044 2 WASHER FLAT M8 X 17 X 1 2 WINCH TO BULL BAR 6151110 2 BOLT ...

Page 2: ...ar of the bull bar using the holes in the bull bar as a guide mark out the new hole position on the roller fairlead and drill out to 7 The winch clutch handle must be rotated to be easily accessible when fitted into the bull bar Remove all the Allen screws retaining the clutch and gearbox Rotate this assembly clockwise so the handle can be reached from the cut out in the bull bar on the passenger ...

Page 3: ... under the head of both bolts and insert bolts through roller fairlead bracket and side rollers Fit the nyloc nuts and tighten so that the rollers turn freely 17 Wire up the control box cable to the winch Refer to the Warn winch manual for vehicle wiring instructions 18 Remove the existing bumper and splash pan On some vehicles a vacuum canister is attached to the LH side of the bumper This must b...

Page 4: ...r Packers are supplied for this purpose 24 Fit the vacuum canister to the inside of the LH wing with the original screws and connect the line 25 Assemble the number plate bracket and number plate onto the bull bar using the M6 x 16mm bolts flat washers and flange nuts from the bolt kit 26 Fit the indicators to the bull bar and connect the indicator looms to the existing indicator loom with the Sco...

Reviews: