20/05/2014
Page 5 of 10
3782968
11. Place winch on a stand with mounting
holes facing upwards and lower bull bar onto
winch. Align all four holes and secure using 1
½” x 7/16”bolts, 7/16” spring washers and
7/16” flat washers on 10/12,000LB winch.
When using 8/9,000LB winch, secure using 1
½” x 3/8” bolts on top holes and 1 ¾” x 3/8”
bolts on lower holes, plus 3/8” spring and flat
washers.
12. When all bolts are fitted and finger tighten,
centralized bolts in holes and tighten top holes
only, using a stepped ring spanner.
13. Remove lower bolts.
14. Fit roller fairlead into cutout and refit bolts
and tighten firmly.
NOTE. For ease of tightening lower bolts,
use a stepped ring spanner to suit bolts size.
Fig A.
Fig B.
15. Fit winch control box bracket (3756499) to
control box studs as shown in Fig A
16. Using M8 fasteners fit control box
mounting bracket to pan, see Fig B
